Idp
From RTEMSWiki
| Idp | |
 motorola IDP drawing | |
| Board Name | IDP |
|---|---|
| Manufacturer | Motorola |
| Reference | http://www.obsolyte.com/sunFAQ/faq_m68k/ |
| Architecture | Architecture |
| CPU Model | M68000 Family MIcroprocessor |
| Monitor | uROM68K and MON68 |
| Runs on Simulator? | Yes |
| Aliases | Any RTEMS BSP Aliases? |
| RAM | 2040 Bytes SRAM |
| Non-volatile Memory | Two 32-Pin EPROM Sockets |
| Serial Ports | RS-232 |
| Video | Video Unspecified. |
Contents |
Overview
A series of products by Motorola that consists of a motherboard and various plug-in modules for different CPUs and I/O modules. The motherboard connects to a terminal or host computer through a RS-232 serial port. This system provides a low cost evaluation platform for developing software and hardware for M68K family members. The Product Brief part is M68KIDP/D.
The IDP motherboard is a compact (10.7" x 7.5") printed circuit board. The motherboard is designed to accept any of the M68000 CPU modules and up to five input/output (I/O) modules. Functions provided by the IDP motherboard includes; bus routing and termination, power distribution, bus master and interrupt signal routing, serial and parallel I/O, clock calendar functions, and system memory. The IDP motherboard includes the following hardware features:
- One CPU Slot (M68000 Family CPU module)
- Five IDP Bus-Compatible I/O Slots
- Two RS-232 Serial I/O Channels
- IBM® PC/AT-Compatible Parallel Printer Port/24-Bit Timer
- Battery-Backed Clock/Calendar with 2040 Bytes SRAM
- Two 32-Pin EPROM Sockets, (Up to 512K x 16 EPROM)
- Two Mbytes of 5/2/2/2 Burst Mode DRAM
Board Setup
If there are special jumper or ROM monitor settings, describe them.
Downloading and Executing
Describe the download procedure.
Debugging
How do you debug code on this board? What gdb setup? BDM, stub, etc?
Test Reports
CVS head -- DATE: User:WhoTestedThis: reports that something happened.
